BXGQC - 100H AW HYDRAULIC OIL ISO GRADE 32

  • MSDS: BXGQC
  • Manufacturer: VALVOLINE INC
  • Product Name: 100H AW HYDRAULIC OIL ISO GRADE 32
  • National Stock Number: 9150-00N059232
Product Identification

Product ID:100H AW HYDRAULIC OIL ISO GRADE 32
MSDS Date:04/27/1990
FSC:9150
NIIN:00N059232
MSDS Number: BXGQC

Responsible Party
VALVOLINE INC
LEXINGTON, KY 40512
US

Emergency Phone: 800-274-5263

Info Phone: 606-264-7000

Cage: GO029

Contractor
VALVOLINE OIL CO
14000 LEXINGTON, KY 40512 US

Telephone: 606-357-7206 / 800-274-5263

Cage: 72527

Ingredients

PETROLEUM OIL

Fraction By Weight: 85-100%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)


CLAY, EARTH, FLOOR ABSORB/OTHER ABSORB MATL &

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TOXICOLOGICAL TESTING INDICATES THAT
SIMILAR PRODUCTS ARE NOT HAZARDOUS AS DEFINED BY OSHA (29 CFR
1910.1200).
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:THORO WASH EXPOSED AREA W/SOAP & WATER. REMOVE CONTAM
CLTHG. LAUNDER CONTAM CLTHG BEFORE RE-USE. EYES:FLUSH W/LG AMTS OF
WATER FOR AT LST 15 MINUTES, LIFTING UPPER & LOWER LIDS
OCCASIONALLY, GET MED ATTN. INGEST:DO NOT INDUCE VOMIT, KEEP
PERSON WARM & QUIET & GET MED ATTN. INHAL:REMOVE INDIVIDUAL TO
FRESH AIR. IF BRTHG IS DFCLT, ADMIN OXYGEN. IF BRTHG HAS STOPPED
GIVE ARTF RESP. KEEP (SUPDAT)

Fire Fighting

Flash Point:400F,204C
Extinguishing Media:REGULAR FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER/FOAM MAY CAUSE FROTHING WHICH CAN BE VIOLENT & POSS ENDANGER
LIFE OF FIREFIGHTER, ESP IF (SUPP DATA)
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH ON OR
NEAR DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN JUST RESIDUE) CAN
IGNITE EXPLOSIVELY.

Accidental Release

Spill Release Procedures:SM SPILL:ABSORB LIQ ON PAPER, VERMICULITE,
FLOOR ABSORB/OTHER ABSORB MATL. LG SPILL:PVNT RUN-OFF TO SEWERS,
STREAMS/OTHER BODIES OF WATER. IF RUN-OFF OCCURS, NOTIFY PROPER
AUTHS AS REQD, THAT SPILL HA S OCCURRED. PERSONS NOT WEARING PROT
EQUIP(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT TRANSFER TO UNLABELED
CONTAINER. DO NOT USE CUTTING OR WELDING TORCH ON THIS CONTAINER
(EVEN EMPTY). FOR INDUSTRIAL USE ONLY.
Other Precautions:BEFORE USE, REVIEW MSDS FOR MORE DETAILED INFO, INCL
CHRONIC HLTH EFTS. CNTNRS OF THIS MATL MAY BE HAZ WHEN EMPTIED.
SINCE EMPTIED CNTNRS RETAIN PROD RESIDUES (VAP, LIQ &/OR SOLID),
ALL HAZ PRECS GIVE N IN THIS MSDS MUST BE OBSERVED.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
Ventilation:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . NORMAL WORK CLTHG COVERING ARMS & LEGS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:SPRAYED INTO CNTNRS OF HOT, BURNING LIQ. FIRST AID
PROC:PERS WARM, QUIET & GET MED ATTN. SPILL PROC:SHOULD BE EXCLUDED
FROM AREA OF SPILL UNTIL CLEAN-UP HAS BEEN COMPLETED. STOP SPILL
AT SOURCE, DIKE AREA OF SPILL TO PVNT SPREADING, PUMP LIQ TO
SALVAGE TANK. REMAINING LIQ MAY BE TAKEN UP ON SAND,(ING 2)

Chemical Properties

Boiling Pt:B.P. Text:>425F,>218C
Vapor Density:HVR/AIR
Spec Gravity:0.873
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:LIQUID, HOMOG SOLUTION.

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM TOXIC MATLS: CARBON DIOXIDE &
CARBON MONOXIDE, VARIOUS HYDROCARBONS, ETC.

Disposal

Waste Disposal Methods:SMALL SPILL:DISPOSE OF I/A/W ALL LOCAL, STATE &
FEDERAL REGULATIONS. LARGE SPILL:DESTROY BY LIQUID INCINERATION.
DISPOSE OF I/A/W ALL LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.